0
฿0.00
An empty cart
You have no item in your shopping cart
Domnick Thailand · Part of RS Group
PowerGenerationUtility Solutions
From the air compressor for power plant instrument and service duty, through filtration and drying that keep every control valve responsive, to the complete water treatment train, process filtration, RO membrane, and UV water treatment, we supply all 7 utility categories that keep generating units online across Thailand.
✓ ISO 8573-1 Class 0–3 Air Quality ✓ Instrument Air to −40°C PDP ✓ Boiler Feed Water Quality ✓ 24/7 Continuous Duty
Plant Utility Train Overview
Compressed Air Side Categories 01–04
CompressionScrew / oil-free / high pressure
FiltrationCoalescing · particulate · ISO 8573-1
DryingDesiccant PDP −40°C instrument air
Fluid & MotionHose · fittings · turbine hydraulics
Water Treatment Side Categories 05–07
Process FiltrationFeed water · condensate · cooling
RO MembraneDemineralized boiler feed water
UV TreatmentChemical-free microbial control
7 Integrated Categories One engineering partner
Product Coverage 7
Utility CategoriesAir side and water side, engineered together
Instrument Air −40°C
Pressure Dew PointDry, oil-free air for valve actuation and controls
Demineralized Water <0.2µS/cm
Conductivity TargetRO-based boiler feed water quality
Availability 24/7
Continuous OperationUtilities specified for base-load reliability
Industry Overview
Integrated Utility Systems for Power Plants in Thailand
Thailand's power generation sector, spanning combined cycle gas plants, thermal units, biomass and cogeneration facilities, and independent power producers, runs on two utility streams that never stop: compressed air and treated water. Both must perform to specification for as long as the unit is dispatched.
On the air side, a reliable compressed air system power plant installation supplies the instrument air system power generation processes depend on, actuating control valves, dampers, and soot blowers. On the water side, the boiler feed water filtration system, RO membrane power generation units, and UV disinfection stages protect the boiler, turbine, and cooling circuit from scale, corrosion, and biological fouling.
Domnick Thailand designs, supplies, installs, and commissions all 7 categories as one integrated scope, so plant engineers and procurement teams work with a single point of accountability for the full utility infrastructure.
- Oil free air compressor power plant packages, ISO 8573-1 Class 0
- High pressure air compressor power plant duty for starting air
- Compressed air filter for power plant instrument and service lines
- Desiccant air dryer power plant systems to −40°C PDP
- Fluid connectors for power plants and turbine hydraulic circuits
- Condensate polishing filtration and cooling water filtration
- Demineralized water system power plant RO trains
- UV water treatment for cooling and process water circuits
Utility Dependency by Plant System
Where Air and Water Quality Decide Reliability
Every generating unit depends on instrument air for control response and on treated water for thermal cycle integrity. When either stream falls out of specification, the consequence is not a maintenance note, it is lost megawatt hours.
Why It Matters
The Megawatt Cost of Utility Failure in Power Generation
In a power plant, every utility problem is measured in the same unit: lost generation. Three failure paths account for most air and water related outages.
Air System Risk Unit
Trip Loss of instrument air forces valves to fail-safe position
Trip Loss of instrument air forces valves to fail-safe position
Instrument Air Loss Shuts the Unit Down
Pneumatic control valves, dampers, and actuators across the boiler and turbine island depend on clean, dry instrument air. When the air compressor for steam turbine control duty falters, or moisture from an overloaded dryer freezes and corrodes actuator internals, valves drift or slam to their fail-safe position. The distributed control system reads the deviation and trips the unit. Restart of a large thermal unit takes hours and burns significant fuel before a single megawatt reaches the grid. Correct sizing, redundancy, and a maintained power plant pneumatic control system make this failure path predictable and preventable.
Consequence Chain
- Control valve failure to safe position
- Automatic unit trip and grid disconnection
- Multi-hour restart with fuel penalty
- Dispatch and availability penalties
Water Chemistry Risk Heat
Rate Loss Scale and corrosion silently erode boiler and turbine efficiency
Rate Loss Scale and corrosion silently erode boiler and turbine efficiency
Feed Water Quality Decides Boiler and Turbine Life
Silica, hardness, and dissolved solids that pass an underperforming power plant water treatment system deposit as scale on boiler tubes and turbine blades. A thin scale layer insulates heat transfer surfaces, raising fuel consumption for the same output, while chloride carryover pits blade surfaces. Left unchecked, the path ends in tube failure and a forced outage. A correctly staged train, industrial water filtration power plant pre-treatment, an RO system for boiler feed water, and continuous conductivity monitoring, keeps the steam cycle at design chemistry from day one.
Consequence Chain
- Scale formation on heat transfer surfaces
- Rising heat rate and fuel cost per MWh
- Blade pitting and erosion damage
- Boiler tube failure and forced outage
Cooling Circuit Risk MW
Derating Biofouling degrades condenser vacuum and plant output
Derating Biofouling degrades condenser vacuum and plant output
Biological Fouling Steals Condenser Performance
Cooling towers and condenser circuits are ideal environments for algae and bacterial slime. Biofilm on condenser tubes reduces heat transfer, weakens vacuum, and forces the unit to run below rated output during exactly the hot months when demand peaks. Chemical dosing alone struggles to keep up and adds handling and discharge concerns. Combining power plant cooling water filtration with UV disinfection that controls microbial growth without added chemicals keeps the cooling circuit clean, protects discharge compliance, and holds condenser performance at design.
Consequence Chain
- Biofilm on condenser and heat exchanger tubes
- Vacuum loss and output derating
- Higher chemical dosing and discharge risk
- Unplanned cleaning outages
Compressed Air Side
Category 01 🔩 Air Compressor
Screw, vane, piston, diaphragm, and centrifugal machines for every plant duty, from an industrial air compressor power generation service package to high pressure starting air and oil-free instrument air supply.
Explore Category 02 🧹 Compressed Air FilterCoalescing, particulate, and vapour removal stages forming a complete power generation air filtration system, protecting instrument air lines, pneumatic tools, and the air system for generator cooling support.
Explore Category 03 💨 Compressed Air DryersCompressed air dryers for power plants in refrigerated and desiccant configurations, delivering moisture removal in power plant air system duty and holding instrument air at −40°C pressure dew point.
Explore Category 04 🔧 FCG & Motion SystemsHydraulic hose solutions power generation circuits rely on, plus tube and pipe fittings high pressure lines, sealing solutions high temperature power plant zones, and steam turbine hydraulic control systems.
ExploreWater Treatment Train
Stage 1 · Category 05 Process Filtration
Process filtration power generation trains depend on, with industrial filter cartridges for raw water, cooling water, and condensate polishing filtration, removing solids before they reach membranes or boilers.
Explore Stage 2 · Category 06 RO MembraneReverse osmosis system power plant packages producing demineralized make-up, from a boiler feed water RO system to ultra pure water RO power station polishing, protecting the entire steam cycle.
Explore Stage 3 · Category 07 UV Water TreatmentChemical-free UV disinfection for cooling water, condenser circuits, and process water, controlling microbial growth and biofouling without chlorine dosing, and protecting discharge water compliance.
Explore Standards & Compliance
ISO 8573-1 Class 0–3 ISA 7.0.01 Instrument Air ISO 9001 Quality ISO 14001 Environmental ISO 50001 Energy ASTM D1193 Water Grades Thailand Energy Efficiency
Keep Every Megawatt On the Grid
Our power generation utility engineers provide complete system design, product specification, and commissioning support for combined cycle, thermal, biomass, and cogeneration plants, plus independent power producers throughout Thailand.
Get expert guidance when you need it. Our support team is here to provide you with the right solutions.
