SmogHog® PCN mobile ESP collector

Description

The PCN mobile ESP electrostatic precipitation filtration unit is a mobile self-contained source capture extraction system designed for intermittent use and rated up to 1,000 CFM. The PCN can be used to remove welding fume, oily smoke or light mist from the air. Contaminant is captured at its source by a unit-mounted 8 inch diameter, 7’/10’/12′ long extraction arm, flexible hose or rigid duct using an optional 8 inch inlet collar. The air is then conveyed to the precipitator where it is collected. Clean air is then re-circulated back to the work area. As air approaches the precipitator, it passes through a reusable, aluminum mesh mechanical pre-filter which aids air distribution and removes large particles. Pre-filtered air then passes through an ionizer where particles are charged by corona discharge from a series of small diameter charged tungsten wires centered between grounded plates. Particles then pass through a collection cell, consisting of alternately charged and grounded parallel aluminum plates. Charged plates at the same polarity as the charged particles repel the particles toward the grounded plates which, in turn, attract the particles. Air next passes through a centrifugal blower where it is exhausted vertically through an adjustable outlet grille, back to the work space. An integrally mounted power pack converts 115 volt, single-phase AC power to the high voltage DC required for ionizer and collection cell operation. If required, a HEPA after filter can be added to certain models to provide 99.97% filtration efficiency.

Technical Specifications
Height: 44 inch
Width: 28 inch
Depth: 42 inch
Inlet Connection Size: 8 inch
Brand: SmogHog
Filter Type: Electrostatic Precipitator (ESP)
Optional Accessories: XA Extraction Arm / Inlet Collar – 8 inch
Weight: 400 lb
Paint Type: Powder Coated
Color: Hog Gray
Compatible Prefilter: Aluminum Mesh, 33-0001
Filter Element Type: Ionizer cell, 02-0044 / Collection cell, 02-2339