OIL-X ‘Point Of Use’ Oil Vapour Reduction Filters

Description

Oil vapour is oil in a gaseous form and will pass straight through coalescing filters which are designed to remove liquid oil and oil aerosols, Parker recommend activated carbon adsorption filter technology to reduce oil vapour.

OIL-X ‘point of use’ oil vapour reduction filters are available in two options: the Grade ACS single stage adsorption filter and Grade AC double stage filter – Grade AC consists of both coalescing and adsorption filter elements combined into one housing. OIL-X Grades ACS and AC are used for smaller flow rate applications and applications where more frequent element changes can be tolerated.

Features/Benefits
• High efficiency ‘point of use’ filters
• Protects downstream equipment and processes
• Provides high quality, clean, oil free compressed air to international standards
• Reduced cost of ownership
• Enhanced health and safety
• Suitable for all types of air compressor and compatible with all compressor lubricants
• Manufactured in accordance with ISO9001

Sizing and Selection
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

Technical Specifications
Division: Gas Separation and Filtration Division EMEA
Brand: Parker
Technology: Filtration
Product Type: Compressed Air Filter
Filter Type: Adsorption: Oil Vapour Reduction
Product Series: OIL-X Grades ACS and AC
Application: Compressed Air and Nitrogen Gas Applications
Industry: Industrial Manufacturing Equipment, Food & Beverage, Automotive, Electronics, Pharmaceuticals, Medical & Dental
Flow Rate: Grade ACS: 36 to 3600 m³/hr @ 7 barg (21 to 2119 cfm @ 102 psig), Grade AC: 22 to 305 m³/hr @ 7 barg (13 to 180 cfm@ 102 psig)
Micron Rating: Grade ACS: Not Applicable, Grade AC: Down to 0.01 micron, n/a (Grade ACS), down to 0.01 micron (Grade AC)
Port Size: 1/4 to 4 inch
Connection Type: BSPP or NPT
Residual Oil Content: Grade ACS: 0.003 mg/m³ / 0.003 ppm(w) @ 21°C (70°F), Grade AC: Aerosols: 0.01 mg/m³ / 0.01 ppm(w) @ 21°C (70°F), Vapour: 0.003 mg/m³ / 0.003 ppm(w) @ 21°C (70°F)
Pressure Differential: Grade ACS: < 85 mbar (1.2 psi), Initial Dry, 100% Flow, Grade AC: < 773 mbar (11 psi) Initial Dry, 100% Flow
Materials of Construction: Die Cast Aluminium
Drain: Automatic Float or Manual
Operating Pressure: Grade ACS: 1 to 20 barg (15 to 290 psig), Grade AC (Float Drain): 1 to 16 barg (15 to 232 psig)<br, Grade AC (Manual Drain): 1 to 20 barg (15 to 290 psig)
Operating Temperature: Grade ACS: 2 to 50°C (35 to 122°F), Grade AC: 2 to 30°C (35 to 86°F)
Compatible Element: Grade ACS: Single Stage, Grades AA & AC: Double Stage. Codes dependent on filter size.
Element Change Interval: When oil vapour is detected.
Specifications Met: Fully tested – In accordance with ISO8573-5 Filtration performance independently validated – by Lloyds Register. PED 2014/68/EU Fluid Group II
Height: Grade ACS: 180 to 847 mm (7.09 to 33.3 inch), Grade AC: 311 to 733 mm (12.3 to 28.9 inch) mm
Width: Grade ACS: 76 to 420 mm (3 to 16.54 inch), Grade AC: 76 to 129 mm (3.0 to 5.1 inch)
Depth: Grade ACS: 65 to 282 mm (2.56 to 11.10 inch), Grade AC: 65 to 115 mm (2.6 to 4.5 inch) mm
Weight: Grade ACS:<br/>0.84 to 44.5 Kg(1.86 to 98.11 lbs), Grade AC: 0.8 to 4.1 Kg (1.8 to 9.0 lbs)