0
฿0.00
An empty cart
You have no item in your shopping cart
Hyperfilter Compressed Air Filters
Die cast aluminium water separators for the efficient removal of bulk liquid contamination from a compressed air supply, providing flow rates up to 3600 m³/h @ 7 bar g.
Description
Hyperfilter Die-cast Aluminium Compressed Air Filters
Hyperfilter Die-cast Aluminium Compressed Air Filters
Compressed air incorporates a high concentration of dirt, oil, moisture and other impurities. Failure to remove these contaminants will lead to escalating maintenance costs, lengthy downtimes and damaged finished goods.
Hyperfilter has been specifically designed to prevent these undesired effects, offering a comprehensive range of compressed air filters covering all industrial needs.
The secret of Hyperfilter is its highly advanced filter element. This combines a particle retention efficiency of 99,9999% with a very low pressure drop. The upshot is extremely clean air with minimal operating costs.
Hyperfilter filtration grades
Solid particles
- Class 1: Grade S
- For particles up to 0,01 micron.
- Class 2: Grade P
- For particles up to 1 micron.
- Class 3: Grade Q and D
- For particles up to 3 micron. D grade is specifically designed for the filtration of dry dust, downstream the dryer.
Oil
- Class 1: Grade S
- Max remaining oil content 0,01mg/m³
- Grade C
- Activated carbon oil vapour removal Max. remaining oil content 0,003mg/m³
- Class 3: Grade Q and D
- Remaining oil content 0,5 mg/m³
Product Features:
- Protects tools and downstream equipment
- Increases efficiency, reduces downtimes
- Significantly reduces maintenance costs
- Full range of models and filtration grades for all industrial applications
- Guaranteed performance levels
- The new look housing features a redesigned inside to reduce pressure drops even further, saving energy
Th e diff erential pressure gauge warns when the element needs changing. Both a warning light and a remote contact are also available. Alternatively, it is possible to install an indicator on the fi lter.
Th e air-tight seal cannot be opened when the fi lter is under pressure, off ering added protection.
Th e HDI zero-loss drain (standard on models HFN005-072 for fi ltration grades Q, P and S) features an auto-cleaning protection screen for highest reliability. Simply press the drain to verify its correct operation.
Operation
- The air enters the filter.
- The air passes through the filter element, which holds virtually all solid and liquid particles with a size higher than the grade of filtration installed.
- The filtered liquid and solid particles drop to the bottom of the fi lter to be removed by the condensate drain.
- The filtered air exits the filter.
To maintain the air quality standards, filter elements must be replaced at least every 12 months with genuine Parker Hiross parts.
Annual filter element changes are therefore essential and ensure:
- Optimal performance is maintained
- Air quality continues to meet international standards
- Low operational costs
- Continued protection of downstream equipment & processes Failure to perform the scheduled replacement can lead to increasing system pressure drops.
