OIL-X Compressed Air Filter (For Pressures up to 16 and 20 bar g)-Grade AA

Description

Description
The Parker OIL-X range of die-cast compressed air filters has been designed from the outset to meet the air quality requirements of all editions of ISO8573-1, when validated in accordance with the stringent requirements of ISO12500-1.

An efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. Designed using domnick hunter filtration technology, OIL-X filters are designed to not only minimise the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimising pressure losses.

OIL-X filters incorporate a number of unique and patented design features to minimise differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximise energy savings and provide the lowest lifetime costs without compromising air quality.

Features
• For the removal of bulk liquid, water and oil aerosols, atmospheric dirt and solid particles, rust, oil vapour, pipescale and micro-organisms
• Coalescing filter performance tested to the stringent requirements of ISO12500-1, ISO8573-2 and ISO8573-4
• Dry particulate filter performance tested in accordance with the requirements of ISO8573-4

Benefits
• Highest air quality
• Lowest operational differential pressure
• Lowest energy consumption
• Lowest CO2 emissions
• Lowest total cost of ownership

Technical Specifications
Division: Gas Separation and Filtration Division EMEA
Brand: Parker
Technology: Filtration
Product Type: Compressed Air Filter
Filter Type: Coalescing and Dry Particulate Filters
Product Series: OIL-X Grades AO and AA
Application: Compressed Air and Nitrogen Gas Applications
Industry: Industrial Manufacturing Equipment, Food & Beverage, Automotive, Electronics, Pharmaceuticals, Medical & Dental
Flow Rate: 36 to 3600 m3/hour at 7 barg, 21 to 2119 CFM at 102 psig
Filter Efficiency Rating: 99.925 %, 99.9999 %
Micron Rating: Grade AO: Down to 1 micron, Grade AA: Down to 0.01 micron, down to 1 micron (Grade AO), down to 0.01 micron (Grade AA)
Port Size: 1/4 to 4 inch
Connection Type: BSPP or NPT
Residual Oil Content: Grade AO: 0.5 mg/m³ / 0.5 ppm(w)@ 21°C (70°F), Grade AA: 0.01 mg/m³ /0.01 ppm(w) @ 21°C (70°F)
Pressure Differential: Grade AO/AA PX010 – 055 Coalescing: Initial Saturated, 100% Flow: < 125 mbar (1.8 psi), Grade AO/AA PX060 Coalescing: Initial Saturated, 100% Flow: < 170 mbar (2.5 psi), Grade AO/AA PX010 – 060 Dry Particulate: Initial Dry, 100% Flow: < 70 mbar (1 psi)
Materials of Construction: Die Cast Aluminium
Drain: Automatic Float Drain (Coalescing Filters)Manual Drain (Dry Particulate Filters)
Operating Pressure: 1.5 to 16 barg, 22 to 232 psig (PX010 to 055 Coalescing), 1 to 16 barg (PX010 to 055 Coalescing), 15 to 232 psig (PX060 Coalescing), 1 to 20 barg (PX060 Coalescing), 15 to 290 psig (PX010 to 060 Dry Particulate)
Operating Temperature: PX010 to 055 Coalescing: 2 to 65°C (35 to 149°F), PX010 to 055 Dry Particulate: 2 to 80°C (35 to 176°F), PX060 Coalescing: 2 to 66°C (35 to 150°F), PX060 Dry Particulate: 2 to 100°C (35 to 212°F)
Compatible Element: P010AO to P0600AO, P010AA to P0600AA Depending on Model
Element Change Interval: 12 months
Specifications Met: Fully tested – In accordance with ISO12500-1 / ISO8573-2 for oil aerosol and ISO8573-4 for particulate. Filtration performance independently validated – by Lloyds Register. PED 2014/68/EU Fluid Group. II.
Height: 180 to 847 mm, 7.09 to 33.5 inch
Width: 76 to 420 mm, 2.99 to 16.54 inch
Depth: 66 to 282 mm, 2.6 to 11.1 inch
Weight: 0.81 to 44.5 Kg.(1.78 to 98.1 lbs)