Fulflo Parmax | Filter Cartridges

Description

Filter Cartridges Large-diameter, high-flow cartridges

The best of pleated and large diameter technologies are combined in Parker’s ParMaxTM high-flow filter cartridges. ParMax cartridges are available with polypropylene and micro fiberglass media in absolute (99.98%) ratings from 0.8 to 90 micron. The unique layered construction provides excellent retention across a wide range of flux rates. One-six inch diameter cartridge can handle up to 500gpm flow (60” length). The inside-to-outside flow allows for a high contaminant holding capacity. High flow and a long filter life make the ParMax an ideal choice for a wide variety of critical process applications.

ParMax Select cartridges are available with polypropylene pleated depth media and micro fiberglass media in absolute (99.98%) ratings from 1 to 90 microns.

Applications

• Process Water
• Power Generation
• Specialty chemicals
• Food and Beverage

Features/Benefits

• Large diameter yields higher flow rates than traditional 2.5˝ filters
• High flow capacity allows for fewer elements and less capital expense
• 100% thermally welded
• Inside-out flow pattern ensures positive capture of contaminants
• Absolute retention ratings for critical filtration
• All materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
• Manufactured with strict quality control
• ISO 9001 registered company

Fulflo ParMax™ SELECT Cartridge

Specifications

Materials of Construction

• Media:
  • RSCP – Polypropylene
  • RSMG – Micro fiberglass
• Support/Drainage:
  • Polypropylene
• Hardware: Polypropylene
• O-Rings (SOE):
  • EPDM, Buna-N, Viton®, Silicone

Retention Ratings (99.98%):

1, 3, 4, 5, 10, 20, 30, 40, 90 μm

Dimensions (nominal):

• Outside Diameter: 6.0˝ (15.24 cm)
• Inside Diameter: 2.9˝ (7.36 cm)

Maximum Operating Conditions:

• Maximum Temperature:
  176ºF (80ºC) @ 30psid (2.1bar)
• Maximum Differential Pressure:
  70psi (4.8bar) @ 77ºF (25ºC)
  30psi (2.1bar) @ 176ºF (80ºC)

Recommended Operating Conditions:

• Flow Rate:
  • Up to 175gpm (662 LPM)/20˝ element
  • Up to 350gpm (1325 LPM)/40˝ element
  • Up to 500gpm(1892 LPM)/60˝ element
• Change-out Pressure: 35psid (2.41bar)

Ordering information

NFT: RCP media and length configurations built with an EPDM seal carry an NSF certification.