C Series Cyclone

Description

C Series Cyclone Dust Collectors

The Most Effective Way To Remove Large Size Contaminants from your factory.

High-Efficiency Cyclone Separator

The DustHog® C Series cyclone is designed to effectively remove large to moderate-size particles (chips, metal grindings, sawdust) from the air stream. Used alone or in conjunction with another dust collector, the cyclone separates coarse contaminants from fine, non-visible particles, and exhausts clean air.

The cyclone dust collector offers airflow capacities ranging from 800 to 13,000 CFM. Its high-efficiency performance is accomplished by means of the unit’s long tapered cone, highvelocity inlet and welded helix. Dirty air enters the unit at a high speed and is then spun around in a spiral motion, throwing particles against its cone wall. Centrifugal force pushes the larger or heavy dust particles down through the narrow part of the cone and into a collection drum or hopper. Cleaned air runs back up through the center of the unit and is discharged back to the atmosphere or into a genuine replacement filter for further processing.

Applications

Buffing
Bulk Powder
Conveying
Fiberglass/Plastic
Grinding
Machining
Polishing
Sawing
Woodworking

Options

Parker Hannifin provides a comprehensive selection of options and accessories to enhance the performance of your C Series cyclone dust collector. Some of these include:

Explosion Relief Vent
- Minimizes damage and provides a degree of personal protection in the event of an explosion that may result when collecting explosive dusts.
Silencer Package
- Duct-type and acoustical foam-lined fan housing silencers reduce unit noise levels.
Fully Welded Construction
- Provides a complete, airtight seal to meet unique specifications.
Replacement Filter Magnehelic® Gage Kit
- Monitors pressure drop to indicate when filters need to be changed.

Accessories

Access doors
Aluminum fan wheel
Drum lid latch kit/slide gate
Explosion-proof motor
Explosion venting
Increased hopper clearance
Leg extensions
Lined plenum
208/3/60 motor option
Scroll outlet
Sprinkler heads
Stainless steel
Starter panel with fused disconnect
Throw out bin

AF Versus C Series

For indoor cyclone installations, Parker Hannifin offers genuine AF series replacement filters. These replacement filters bolt directly to the cyclone blower outlet or are remotely mounted using interconnecting ducting. AF-Series genuine replacement filters consist of up to 24 10 oz. polyester felt zippered filter tubes.

Another option is the C Series replacement filter, which can be installed inside or outside your facility. These units remotely connect to the cyclone with ducting and empty into 55-gallon drums. Standard filter media are 9 oz. polyester felt bags. Outdoor C Series units are designated with a “W” for weather enclosure, and are constructed using epoxy-coated cold rolled steel for the harshest environmental conditions. A Parker Hannifin Representative can help you determine which replacement filter is the best fit for your specific application.

Customized System

The C Series cyclone offers a variety of configurations to help meet your company’s industrial air cleaning needs. With the assistance of a Parker Representative, you can actually “design” a cyclone unit and replacement filter to match your specific application. Select the direction of the inlet and discharge areas, exhaust clean air back into your plant or outdoors, or choose to use the cyclone alone or with a replacement filter.

Different industrial applications generate varying amounts of dust and debris, so Parker Hannifin offers a variety of discharge options. For small quantities, you have the choice of 30- and 55-gallon drums that can be configured under the cyclone unit as a single-or two-drum configuration. For larger loads, you may opt to use the Model C60H hopper, which has a storage capacity of 60 ft3 or Model C110H, which can hold 110 ft3. Additionally, you can add rotary airlocks to your system to constantly discharge dust from a throw-out bin into an external dust storage container.

Energy Efficient

C Series cyclone fans are self-cleaning, material handling radial blades designed to deliver peak airflow with low horsepower to conserve energy. All models can be installed indoors or outdoors, and clean air can be returned inside your factory if the cyclone is equipped with a replacement filter.